SPORTSPOWER Almansor MSC-3242-6FT Скачать руководство пользователя страница 1

Страница: 1 / 40

MODEL#MSC-3242-6FT

Almansor Metal Swing Set

OWNER’S MANUAL

ASSEMBLY, INSTALLATION, CARE, MAINTENANCE AND USER INSTRUCTIONS

FOR RESIDENTIAL USE ONLY

For Customer Service, please call 1-866-370-2131 or visit

www.sportspowerltd.net

Monday – Friday 9:00 AM – 5:00 PM Eastern Time

Sportspower Ltd.

Flat M, Kaiser Estate Phase 3, 11 Hok Yuen Street, Hunghom, Kowloon, Hong Kong

Corporate Office 1-800-497-6106

WARNING



This product is designed to be used simultaneously by up to 6 children between ages 3 to 8.



Maximum weight of each user is 100lbs(45kg). Combined weight of all users must not exceed

600lbs(272kg).



Carefully read this entire instruction manual before you start to assemble or use this swing set.



You must follow all instructions and warnings while using this equipment.



Do not use this swing set on hard packed soil, concrete, or any kind of hard surface.



This equipment must be anchored (anchors not included). You should consult your local contractor

regarding the best way to anchor the product in your location of installation.



Assembly requires at least two adults.

Содержание Almansor MSC-3242-6FT









































Результаты поиска

Содержание Almansor MSC-3242-6FT

Отзывы:

Похожие инструкции для Almansor MSC-3242-6FT

Бренды по названию

Популярные бренды

SPORTSPOWER Almansor MSC-3242-6FT, Руководство пользователя

Результаты поиска

Содержание Almansor MSC-3242-6FT

Отзывы:

Похожие инструкции для Almansor MSC-3242-6FT

Бренды по названию

Популярные бренды