68
SETTING THE TENSION
If the belt is too loose in general (if it flatters), use the hex key to turn both screws a ½
turn clockwise. Then check the belt's tension.
Caution: Carefully adjust the belt using the screws and as few turns as possible.
BELT DRIFTS LEFT
If the belt drifts left, use the hex key
• to turn the left screw a ½ turn clockwise and
• the right screw a ½ turn counterclockwise.
Then check the belt's position.
SP-TM-4216e-06 (DE+GB).indb 68
9/12/13 5:16 PM