Copyright © Lojer Oy, 2021 | 05/2021
10
2.3 Safety instructions
For safety reasons always connect the power cord to grounded socket which should be located
near the head end of the examination table.
Do not bind the power cord to the device as the lifting motion can damage the cord. Ensure
that the cord is easily detachable in emergency situation.
Make sure that the distance to the socket is not more than 2 meters.
Always detach the power cord before moving the
device. Make sure that the cord doesn’t get
stuck between parts of the frame or under the castors.
If the power cord is damaged, unplug it immediately. Do not use the device and contact the
service. Use only the original power cord.
Make sure that there is enough space between the socket and the device and that raising the
device will not damage the plug or cord plugged into the socket.
Make sure that the patient doesn’t accidentally move/touch
any control device.
Make sure that the patient’s limbs do
not get caught in the frame of the device.
Do not place the device under any wall structures or too close to the wall.
Do not place anything under the device.
Only patient should be on the lying surface when the table is adjusted.
Make sure that there is enough space around, above and below the device for the movements.
Notice that the accessories increase the need for space.
Make sure that the space around the device is safe. There should be no sharp edges or other
possibly harmful objects around the table.
Do not modify the structure of the device or install parts other than those mentioned in this
document.
