Spon NAS-8521A, Руководство пользователя, Страница: 9 / 21

IP network intercom terminal User Manual
7
distance (the distance between the panel and splitter should be less than 100 meters).
Status light description
The light will be red after power on, user can check the terminal executive task situation from the status indicator light
Status light (color) Terminal status
Red slow flash Off-line status
Green normal light Free status
Red fast flash Intercom status
Green fast flash Broadcast status
Basic network setting
Connected the terminal as per the installation manual, then switch on power, and revised the terminal network parameters
according to the environment conditions ,there are two ways:
Terminal equipment scanning tools
（
1
）
Under[optical disk:\software tool\]list, find it and run
“IP audio terminal configuration tool” ，
after initial it
，
enter the
default password
“123456”
（
2
）
From the right menu choose [forced way configure], and fill in the correct parameter in [terminal parameter], click" send
parameters "button to complete the IP parameters Settings.
Web page way
Access into IP network intercom terminal Web interface to revise the network parameters according to the live
environment,
click “save” after setting.
For the specific operation steps please refer to the custom terminal network parameters settings.
Custom terminal parameters
Login web interface
（
1
）
Enter the IP network intercom terminal address in the browser address bar(the factory default IP address is