Spohn & Burkhardt FS Series, Руководство по эксплуатации

Страница: 77 / 132

77
Spohn & Burkhardt
DRAFT
Shock absorption
Adjust the shock absorption as follows.
Set the switch (
12.2 ) (see Figure 26 “Pneumatic spring system: Adjustments”, page 76) to position "1"
(hard), "2" (medium) or "3" (soft) to set the required shock absorption.
Note
The "medium" setting is not available on all variants.
6.4. Adjusting armrests
6.4.1. Armrests AS1-18 and AS1-30
Figure 27.
10
10.1
10.2
10
10.1
10.2
AS1-18 AS1-30
Armrests AS1-18 and AS1-30: Adjustments
The armrests ( 10 ) AS1-18 and AS1-30 can be adjusted for height and tilt, as well as forward and back-
ward.
Adjust the armrest (
10
) tilt as follows:
1. Undo the tommy screw (
10.1
) and adjust to the required tilt.
2. Retighten the tommy screw (
10.1
).
Adjust the armrest (
10
) height as follows:
1. Undo the tommy screw (
10.2
) and adjust to the required height:
2. Retighten the tommy screw (
10.2
).
Adjust the armrest (
10
) forward and backward as follows:
1. Undo the tommy screw (
10.1
) and adjust to the required position:
2. Retighten the tommy screw (
10.1
).