Split-fire 4003, Руководство пользователя

Страница: 26 / 47

4003 Woodchipper
Operating Instructions
Owners Manual
26
Do not attempt to pull back branches that are beyond the lip of the
infeed chute. Branches this far into the chipping cycle will feed
through as the amount of wood remaining is manageable.
28. Continue chipping as needed. Always be vigilant of your
surroundings on the worksite and on the material being fed into the
4003 woodchipper.
If any abnormal noises or movements are observed, stop the
woodchipper immediately by pushing the emergency stop switch(if
connected) or by disengaging the PTO. Contact Split-Fire
immediately concerning the issue.
Once chipping has been completed, follow these shutdown steps:
1. Allow the woodchipper to run under no load for 1-2 mins. During
that time verify that the infeed chute is totally empty. If there are any
remnants, use a forked push stick to clear the infeed chute. This will
allow the woodchipper to clean itself out and run under no load.
2.
Once the chipper has been cleared out, the PTO lever can be
disengaged.
3.
RPM’s can be lowered
4. The woodchipper can be moved back to its storage location and
removed from the tractor
.