Spirit XT385 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 36

Spirit XT385 Скачать руководство пользователя страница 9

5

Treadmill

XT

385

Please read before unpacking your folding treadmill. Serious injury could occur if this folding treadmill
is not unpacked properly.

There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding accidentally
during shipping. If this strap is not removed properly the treadmill could spring open unexpectedly and cause injury if
someone is standing near the treadmill when the strap is removed.

8SIRWYVI]SYVTIVWSREPWEJIX]HYVMRKVIQSZEPSJXLIWLMTTMRKWXVETTPIEWIQEOIWYVIXLIXVIEHQMPPMWTSWMXMSRIH¾EX

on the ground, in the orientation it would be in if you were using the treadmill. Do not turn the treadmill up on its
side while removing the shipping strap. This could cause the treadmill’s folding mechanism to spring open. If the end
of the Velcro strap (that you need to grab to remove it) happens to be under the treadmill deck, reach under the
deck to grab it, but do not tilt the treadmill up to gain access to the strap end.

'YXXLIFERHMRKWXVETW[MXLEWLSVXFS\GYXXIVVE^SVORMJIWITEVEXIXLIGEVXSRJVSQXLISRIYRHIVRIEXLMXF]

prying up on the staples (if applicable). Pull the carton over the treadmill parts and locate the hardware pack. The

LEVH[EVITEGOMWWITEVEXIHMRXS½ZIWIGXMSRWSRIWIGXMSRGSRXEMRMRKXSSPWERHJSYVWIGXMSRWPEFIPIHWXITW[LMGL

contain the hardware needed for assembly of each step. The assembly steps below are numbered one through four
and correspond to the hardware in the numbered sections of the hardware pack. Remove only the hardware for the
step you are currently assembling to avoid confusion and mix ups.

Then remove the treadmill from the carton and lay it on a level surface.

Pre-Assembly

XT

385

A

ssembly Instructions

Assembly Tools

#131.

Combination M5 Allen Wrench/

Phillips Head Screw Driver

#132.

M6 Allen

Wrench

#75.

Safety Key

#30.

Deck/Belt

Lubricant

#148.

Phillips Head Screw Driver

To assist you in assembling your new Spirit Fitness treadmill, we have posted an assembly video at the following link:

LXXT[[[WTMVMX½XRIWWGSQGYWXSQIVWIVZMGIZMHISXVIEHQMPPZMHISWLXQP

Assembly Video

«
...
7
8
9
10
11
...
»

Содержание XT385





































Отзывы:

Нет отзывов