6
Treadmill
XT
385
1. Install the four speed nuts (
128
) onto the tabs of the frame.
2. Take the Left and Right upright tubes (part numbers
5
&
4
) and slip the upright covers (
67
&
61
left,
66
&
62
right) onto the tubes (observe the cover orientation is correct). Connect the Middle Console Cable (
50
) that
exits from the bottom of the right upright tube with the lower Console Cable (
49
).
NOTE: Partially tighten all bolts in this step. This will allow for easier console assembly.
3. Insert Right and Left Uprights (
4
) and (
5
) into the Frame Base (
2
) and attach with eight Button Head Socket
Bolts (
130
) using the Allen wrench/screwdriver (
131
). Attach two more Button Head Socket Bolts (
130
) and
two Flat Washers (
147
) on the inside surface of the upright tubes.
Be careful not to pinch the wire when installing the upright.
HARDWARE
STEP 1:
Upright Tubes
#130.
5/16” x 15mm
Button Head Socket
Bolt (10 pcs)
#147.
5/16” x 18 x 1.5T
Flat Washer
(2 pcs)
#128.
M5 Speed Nut
Clip (4 pcs)