background image

                                                                                                                                                                               

XT175 / XT275

 

18 

 
 

Factory preset programs (P1~P5), 2 user defined programs, and one Manual program. 
Each preset program has a maximum speed level that is displayed when a desired workout is 
chosen. The maximum speed that the particular program will achieve will be displayed in the 
Speed window.   
Also included are two user programs (User 1 and User 2) for custom workouts.

   

 
To Select a Program: 

STEP 1: 

Press the 

PROGRAM 

▲▼

key to select desired program. Press enter to select the 

program. The display will prompt you through the programming or you can just press Start to 
begin the program with default values. 

 
STEP 2:

 If enter was pressed,

 

the 

Time

 window will display with the default value of 20 minutes. 

You may use any of the up/down, fast/slow keys to adjust the time. After adjusting, or to accept 
the default value, press enter. (Note: You may press start at any time during the programming to 
start the program.) 

 
STEP 3: 

The 

Calorie 

window will now be displaying a value, which is your 

Body Weight

Entering the correct body weight will affect the calorie count. Use the Up/Down keys, Fast/Slow 
to adjust, then press enter.   
A note about the 

Calorie

 display: No exercise machine can give you an exact calorie count 

because there are too many factors which determine exact calorie burn for a particular person. 
Even if someone is the exact same body weight, age and height, their calorie burn may be very 
different than yours. The 

Calorie 

display is to be used as a reference only to monitor 

improvement from workout to workout. 

 
STEP 4: 

The 

Calorie

 window will display the preset top speed of the selected program. Use the 

Up/Down, Fast/Slow keys to adjust, then press enter. Each program has various speed changes 
throughout; this allows you to limit the highest speed the program can reach.   
 
 

User Programs: 

STEP 1: 

Select User 1 or User 2 via the 

PROGRAM 

key then press 

Enter

. Note that the dot 

matrix display portion will have a single row of dots at the bottom (Unless there is a previously 
stored program).   

 
STEP 2: 

Note the Time window is flashing. Use the 

Adjust UP/DOWN

 keys to adjust up from 10 

minutes (if desired). Press 

ENTER 

key. This is a must to continue even if time is not adjusted. 

 
STEP 3:

 The Calorie window will now be blinking a bodyweight value. Enter your bodyweight 

and press 

Enter. 

 
STEP 4:

 The Calorie window will now be blinking an Age value. Adjust the age and press enter. 

Programmable Features

 

Содержание SPT0004 - XT275





























Отзывы: