XT175 / XT275
15
■
XT275 Console
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood. Ensure that the safety key is
installed, as the treadmill will not operate without it.
When the power is turned on, a message will scroll across the dot matrix showing the current
software version. Then the
Time
and
Distance
windows will display Odometer readings for a
short time,
Time
window will show how many hours the treadmill has been in use and the
Distance
window will show how many miles (or Kilometers if the treadmill is set to metric
readings) the treadmill has gone. The treadmill will then enter idle mode, which is the starting
point for operation.
Quick-Start Operation:
STEP 1:
Attach the
Safety
key to enable the display
(if not already on).
STEP 2:
Press the
Start
key to
begin belt movement.
Then adjust to the desired speed using
the
Fast / Slow
keys (console or handgrip). You may also use the rapid speed keys 2 through
10 to adjust the speed.
STEP 3:
To slow tread-belt press and hold the
Slow
key (console or handgrip) to the desired
speed. You may also press the rapid speed adjust keys, 2 through 10.
STEP 4:
To stop the tread-belt press
Stop
key or pull away
Safety
key.
