Spirent Tech-X Flex Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 92

Spirent Tech-X Flex Скачать руководство пользователя страница 49

Tech-X Flex™

Base Unit User Guide Issue 1

4: System Menu

4-7

Intro

Wi

-F

i

10/100

Syste

m

IP/V

ide

o

S

pec

s

4.7.1 About channel guides

A channel guide provides a shortcut for specifying IP video channels during video testing. When the unit
joins and/or monitors a video stream for testing, it requires the IP address and port of that stream. If you
do not have a channel guide on the unit, you must enter the address and port manually. However, if you
do have an active channel guide that includes the respective channel, it allows you to select a simple
channel number or a more intuitive channel abbreviation, such as CNN or HBO. The unit then looks up
the address and port in the guide instead of requiring a manual entry. A channel guide also provides a
series of other default testing parameters for each channel, such codec type and media stream
information.

Within the channel guide file itself (not on a video test screen), a sample entry might appear as follows:

<channel-info>
<channel-number>001</channel-number>
<channel-abbreviation>ESPN</channel-abbreviation>
<IP-address>239.255.1.101</IP-address>
<IP-port>3002</IP-port>
<encapsulation>UDP</encapsulation>
<codec>MPEG2</codec>
<jitter-mode>FIXED</jitter-mode>
<gop-type>GOP_C</gop-type>
<gop-length>15</gop-length>
<loss-sensitivity>0</loss-sensitivity>
<packet-loss-concealment-level>2</packet-loss-concealment-level>
<image-complexity>0</image-complexity>
</channel-info>

...where the element names intuitively denote each respective parameter, such as

<IP-address>

and

<IP-port>

. To be functional, a channel guide must be well-formed and conform to the proper schema.

For more information on schemas and channel guide generation, please contact Spirent.

4.7.2 Importing channel guides to the unit

To import channel guides to the unit, you must follow the procedures described in this section. Channel
guides cannot be imported by any other means.

NOTE:

The procedures in this section are an abbreviated version. If you need further assistance,
please contact Spirent Technical Support.

The import requires two basic steps:

«
...
47
48
49
50
51
...
»

Содержание Tech-X Flex





























































































Отзывы:

Нет отзывов