Z100080
ZX-
1 Operator’s Manual
Spinergy/SMP
Page 25
While the ZX-1 is equipped with front and rear
caster wheels, excessively high cornering
speeds can still create tilting hazard. Factors
which create tilting conditions include, but are
not limited to:
1.
Cornering speed
2.
Steering angle (how sharply ZX-1 is
turned)
3.
Uneven road surfaces
4.
Inclined road surfaces
5.
Operating from an area of low traction to
an area of high traction (such as passing
from a grassy area to a paved area
–
espe-
cially at high speed while turning)
6.
Abrupt direction changes or swerving.
High cornering speeds are not recommended.
If while operating the ZX-1, operator senses a
tilting condition, simply reduce speed and
steering angle or lessen the sharpness of the
turn).
LOCKING ZX-1 (ELECTRONICALLY)
Lock ZX-1 as follows:
1.
While the control system is powered on,
depress and hold the power button.
2.
After 1 second, control system will beep.
3.
Release the power button.
4.
Position joystick forward until control sys-
tem beeps.
5.
Position joystick backward until control
system beeps.
6.
Release joystick, listen for long beep.
7.
ZX-1 is now locked.
UNLOCKING ZX-1 (ELECTRONI-
CALLY)
Unlock ZX-1 as follows:
1.
Using power button, toggle control system
on (maximum speed /crawl indicator rip-
ples up and down).
2.
Position joystick forward until control sys-
tem beeps.
3.
Position joystick backward until control
system beeps.
4.
Release joystick, listen for long beep.
5.
ZX-1 is now unlocked
ENVIRONMENTAL FACTORS
SAFETY FIRST
When operating ZX-1 during daily activities,
operator may encounter situations which
require practice to master. It is helpful to take
ample time to successfully maneuver through
doorways, elevators, wheelchair ramps, and
over moderate unpaved terrain. The more the
ZX-1 is used, the more skill the operator will
develop.
Below are some precautions, tips, and other
safety considerations to familiarize ZX-1
operators on the safest operation methods.
