12/01/2016
Vers. 1.0
51
11 AUTOMATIC Procedure
This procedure is used if the automatic transmission filter is not replaced.
You must connect the car as shown in the previous chapter, set the parameters and follow the instructions on the
screen.
Select the 'AUTOMATIC' procedure with this icon
.
You will access the following screen from you can set the parameters for each phase and start the procedure.
With the “Additive” function you can choose whether or not to add the additive for the washing which has been
prepared in the appropriate bottle as indicated in the paragraph of the previous chapter.
Set “ON” if you wish to
charge the washing additive duri
ng the automatic cycle or “OFF” if you do not wish to charge the additive.
With the “Washing” function you can set the minutes for the washing.
With the “Oil Change” function you can set the oil quantity to be replaced inside the gearbox.
Press the arrow key to start the procedure.
The following series of screens will appear to indicate the operations to be performed on the vehicle.
Once the automatic procedure has started the user will only have to work on the vehicle as indicated during the
different steps.
When the entire procedure has ended, the station will set itself on “Recirculation” waiting for the operator to
intervene.
This procedure can be stopped at any time by pressing the arrow key in the upper right.
