12/01/2016
Vers. 1.0
41
6 Preparing the Car
To start the procedure, you need to perform some preliminary operations:
•
Drive the car for a few minutes so as to bring the gearbox oil at its operating temperature
•
Raise the car using the appropriate lift
•
Remove any protective casing
•
Look for the identification plate, by means of which it is possible to identify the type of transmission you are
going to treat.
Image 13 - Example of a transmission identification plate
•
Finally, locate on the transmission the delivery and return of the lubricant to the heat exchanger, the cap
related to oil level check (if present) and the lubricant’s drain (if present).
Image 14 - Delivery and return pipes, level indicator, drain plug
