TB-5520
02/07 Page 1 of 2
Non-Air Ion Bars
Operation, Installation and Maintenance
SPI • 3651 Walnut Avenue • Chino, CA 91710 • Phone (909) 664-9986 • Fax (909) 363-8193 • SPIWestek.com
Figure 1. SPI Ion Bar and 94245 Controller
INTRODUCTION:
The LINEAR ION BAR SYSTEMS have been designed
to effectively eliminate localized static charges which
exist in the work area.
UNPACKING AND INSPECTION:
Your controller and bars were carefully packed at the
factory in a container designed to protect it from
accidental damage. Nevertheless, we recommend
careful examination of the carton and contents for any
damage. If damage is evident, do not destroy the
carton or packing material and immediately notify the
carrier of a possible damage claim. Shipping claims
must be made by the consignee to the delivering
carrier.
The Non-Air Ion Bars are available in several sizes.
There are 4 Controller options, and several accessory
items. The part numbers are listed below:
HOW TO USE YOUR IONIZER:
YOUR SYSTEM COMES COMPLETE AND READY
TO USE.
1. Locate the controller console in a convenient
position either on or near the target area, close enough
to be able to connect the Ion Bar.
2. Locate and attach the Ion Bar in a position so that
the air ions are directed toward the target area
3. Connect Ion Bar to back of controller console.
4. Plug the console unit into a 110V AC electrical
outlet.
NOTES:
1. One SPI controller will power up to 40 emitters. It is
possible to daisy-chain bars together as long as the
total number of emitters does not exceed 40.
2. To permit the power supply console unit to supply
more than 1 Ion Bar, you must obtain and attach either
a 94250, two to one connector for two bars; or a
94254, four to one connector for three to four bars.
TECHNICAL BULLETIN TB-5520
Made in America
© 2007 DESCO INDUSTRIES INC.
Employee Owned
Item #
Description
94200
Ion Bar Assembly, 12", 2 Emitters
94201
Ion Bar Assembly, 24", 6 Emitters
94202
Ion Bar Assembly, 36", 12 Emitters
94203
Ion Bar Assembly, 48", 12 Emitters
94204
Ion Bar Assembly, 60", 14 Emitters
94205
Ion Bar Assembly, 72", 18 Emitters
94226
Ion Bar Assembly, 96", 24 Emitters
94240
Controller with Recessed Potentiometer Adjustment, 120V
94241
Controller with Recessed Potentiometer Adjustment, 220V
94245
Controller with External Potentiometer Adjustment, 120V
94246
Controller with External Potentiometer Adjustment, 220V
94250
Ion Bar 2 to 1 Connector Set (2 per pack)
94254
Ion Bar 4 to 1 Connector Set (2 per pack)
94252
Emitter for Ion Bar
