Sphere SSA-850, Инструкция по установке и эксплуатации, Страница: 14 / 21

Turning the System On/Off
Since power to the antenna system is controlled by the IDU, you can turn the antenna
on or off by applying power to the IDU.
Turning on the System
Follow the steps below to turn on your antenna System.
1. Make sure the antenna has a clear view of the sky.
2. Turn on your satellite TV receiver and TV.
3. Press the POWER button on the IDU.
4. When the display powers up. Press the SEARCH button. The IDU will
display the OPTUS C1/D3 EAST , if you are in the EAST Zone, and
then allow the unit to start tracking. If you are in the WEST Zone
(please refer to the zone map) while the display is flashing quickly
(approx. 3 second window), press again the SEARCH button to toggle
to OPTUS C1/D3 WEST. The IDU will now control the Antenna, please
allow the satellite to rotate and search for the selected satellite. Once the
IDU locates the satellite and adjusts the Elevation/Direction and final
LNB Skew setting for your area, the IDU Display will power OFF to
save power.
Turning off the System (To CLOSE the DISH)
Follow the steps below to CLOSE the dish and to turn off your antenna System.
1. Press the POWER button on the IDU.
(This will ‘wake up’ the IDU from its sleep mode.)
2. Press the CLOSE button on the IDU, this will start to close the dish to
the home/closed position ready for travel. Once this is completely
closed the IDU display with power off and go back into Sleep mode.
3. Turn off your Satellite TV receiver and TV.