Sperry Marine VISIONMASTER FT ECDIS-E, Руководство пользователя, Страница: 61 / 425

ECDIS-E User Guide Basic Operation of ECDIS-E
65934012 3-17
Vector Modes
Vectors are shown on the display to indicate the velocity (speed and
direction) of own ship and moving targets. All vectors are shown as a
dashed line beginning at own ship CCRP or the target origin. The length of
the vector indicates speed and its bearing indicates direction.
Target vectors are drawn using the same colour as the target symbol,
based on the following conditions:

Target with no alarm condition Non-flashing green

Target with unacknowledged alarm Flashing red

Non-dangerous target with
acknowledged alarm Non-flashing green

Dangerous target with
acknowledged alarm Non-flashing red
For information on own ship vectors, see Own Ship Symbols
Selecting the Vector Mode
The vector mode determines whether the vectors represent the true
velocity of targets or their velocity relative to own ship. The vector mode is
either True (T) or Relative (R) . The default vector mode for ECDIS-E is
True.

True Vectors
All moving targets and own ship have a vector representing their
movement (speed and direction) over the water/ground. Stationary
targets do not have a vector.