Sperry Marine VISIONMASTER FT ECDIS-E, Руководство пользователя, Страница: 349 / 425

ECDIS-E User Guide Targets
65934012 9-19
Target Display
The Target Display window shows the display
parameters for all targets.
In addition to the Targets menu the target
display window can be quickly accessed by right
clicking on the Target icon on the upper toolbar
and selecting
Target Display.. .
The Target Display window is divided into the
following areas:

Target Display

Identification

Past Position Dots

Auto Drop Targets

Other (Vector Timeout)

Number of Targets
Target Display
The Display Targets check box controls the
viewing of all targets on the display. Tick the
check box to view all targets (default), or untick
to remove the targets from the display.
Identification
The target identification is displayed adjacent to
each target’s vector origin and remains visible
as long as the target origin is visible. You can select the target identification
to display one of the following:

Num Target numbers only

Name Target names only (the number will be displayed if no name
has been allocated)

Both Target numbers and names (the name will be left blank if
none has been allocated)

Off No identification
Past Position Dots
This area enables the display and editing of past position dots for all
targets, for information see Past Position Dots.