Sperry Marine VISIONMASTER FT ECDIS-E Скачать руководство пользователя страница 246

Страница: 246 / 425

Sensor Management

ECDIS-E User Guide

6-4

65934012

Sensor Data Sources

Heading Source Values

The Heading window lists the commissioned
heading sensor source (usually Gyro) with the
sensor source and its current bearing value in
highlight.

If the heading data becomes invalid while the
ECDIS-E is in Course Up mode the presentation mode will switch to North
Up after 30 seconds.

STW Source Values

The STW folder lists the available STW sensor
data sources with the currently active sensor
source and its value in highlight.

Computed

is selected for the sensor data

source for STW the system continually computes
the values based on other active types of sensor
data received.

To change the STW sensor source and values, do the following

1. Tick the button next to the source. Whenever the sensor source is

about to be changed a window prompts you to confirm the change.

2. To confirm click the

Yes

button, or to return to the previous sensor

source and value click the

button.

If no sensor source is currently available the user can enter manual sensor
data.

CAUTION: MANUAL SENSOR DATA

Using manual data is not the normal mode of operation. A sensor
device should be selected as soon as valid data is available.

1. To enter manual sensor data click in the

MAN

field, the text

changes to green (editable). Move the trackball left or right to enter
the required value and left click to exit edit mode.

2. Click the

MAN

button to enter the value.

3. Where the sensor is changed the values shown against the

selected data source are applied. If manual data is entered the
STW readout shown in the Indicator Display is displayed in yellow.

Содержание VISIONMASTER FT ECDIS-E










































































































































































































































































































































































































































Результаты поиска

Содержание VISIONMASTER FT ECDIS-E

Отзывы:

Sperry Marine VISIONMASTER FT ECDIS-E, Руководство пользователя, Страница: 246 / 425

Результаты поиска

Содержание VISIONMASTER FT ECDIS-E

Отзывы: