Sperry Marine Rudder Angle Indicator System, Руководство по эксплуатации, установке и обслуживанию

Страница: 32 / 116

056357/B RAIS
6-2 Initial system configuration
6.1 Initial system configuration
Configuring the RAC with SUSI
1. If the RAC is currently powered up, switch off the power first.
2. Open the RAC housing and locate the USB service port receptacle,
J3, on the PCB. Make sure that the port is freely accessible for plug-
ging and unplugging the USB cable. Do not plug in the cable yet.
3. Power up the RAC.
4. At the PC, start up the SUSI application.
A login dialogue pops up:
5. Enter the PIN “ 20097 ”.
This will start up SUSI in the service mode.
Click at the enter key to continue.
6. SUSI’s main window now opens, with the “Application” tab display-
ing a list of supported devices:
7. The “Online” button at the top left of SUSI’s main window will be
greyed out, as SUSI has not yet detected a device to connect to.
The top status line at the top center of the window will read “Waiting
for Connection...”.