Sperry Marine NAVIGAT 100, Руководство по эксплуатации, установке и обслуживанию

Страница: 157 / 212

NAVIGAT 100 056373/D
Service Setup 998 7-37
Service-Setup 998 – Overview
Figure 7-8:
Service Setup 998
BASEPLATE TEST
Initiates baseplate test.
BACKLIGHT TEST
Initiates backlight test.
ERROR LED TEST
Initiates error LED test.
Settings:
none
The baseplate test is immediately executed when entered.
The container applies a 360° turn during the baseplate test.
No heading is provided during the turn.
Settings:
none
The
DIM- /Down (

) / DIM+/Up (

) keys allow manual toggling
between minimum and maximum back light values.
Before leaving the sub menu, recovery of the previous set-
ting is recommended.
Settings:
none
The
DIM- /Down (

) / DIM+/Up (

) keys allow manual toggling
between minimum and maximum LED values.
Before leaving the sub menu, recovery of the previous set-
ting is recommended.
DIM + DIM -
BASEPLATE TEST
BACKLIGHT TEST
ERROR LED TEST
HORN TEST
BACKLIGHT TEST
the test is immediately executed,
when entered
ERROR LED TEST
the test is immediately executed,
when entered
the test is immediately executed,
when entered
HORN TEST
system hardware tests BASEPLATE TEST
the test is immediately executed,
when entered