Spring
Stop Sleeve
Return Wire
Cleaning Bushing
Spoons
Galvanized Thimble
Swag
Trigger
Main Cable
Wire Guide
Conical End Fitting
Miller Fall Protection
PH: 1-800-873-5242 FX: 1-800-892-4078 www.millerfallprotection.com
1” Miller Grip Anchorage
WARNING!!
All persons using this equipment must read and
understand all instructions. Failure to do so may
result in serious injury or death. If a fall occurs,
the Miller Grip must be disposed of according to
the manufacturer’s instruction.
IMPORTANT!!
Users should be familiar with pertinent regulations
governing this equipment. All individuals who use
this product must be correctly instructed on how to
use this device.
Operations and Instruction Manual
Miller Grip Anchorage - Model #497
Portable Concrete Anchorage Connector
ANSI Z359.1 10,000 lbs / 44kn
Manufactured Aug, 2007. Batch #033
1. Follow all manufacturer’s instructions.
2. Use only locking snap hooks or locking carabiners.
3. Always inspect your units prior to use.
4. Use the proper method of coupling to anchorage.
5. Always dispose of this unit after a fall has occurred.
6. Patch all holes with concrete when job is complete.
7. Pregnant women and minors must not use this product.
8. Designed safe working load is 2,000 lbs ( 8.8 KN ). Do not exceed this
weight when you pretension your Life Line System.
1” Miller Grip
T
ested - ANSI Z359.1
Strength -
10,000 lbs / 44 KN
Model - Miller Grip #497
Color Coded Green Thimble
Miller’s 1” Fall Protection Miller Grips are to be used in concrete
substrate only. DO NOT use in steel, wood or any other substrate.
Miller Grips can be placed in:
* Horizontal surfaces
* Horizontal Life Lines
* Vertical surfaces
* Vertical life Line
* Overhead / ceiling surfaces
This product is to be used by qualified fall protection
personnel only. It is to be anchored in accordance with
manufacturer’s requirements in concrete substrate only.
Do not anchor in uncured/wet concrete.
The model Miller Grip #497 is color coded with a green
thimble, and is used for
FALL PROTECTION ONLY
. This
unit is not to be used in any other anchoring situation.
Concrete must have a compressive strength of at least
3,000 PSI (20.7MPa)
Made in the USA
