Spellman DXM100 Series, Инструкция по эксплуатации

Страница: 127 / 128

118142-001 Rev B
Page 103 of 104
6.6.26 Program RS-232 Baud rate
Description:
The host requests that the firmware change the Baud rate for RS-232.
Direction:
Host to supply
Syntax:
<STX><07><,><ARG><,><CSUM><ETX>
Where:
<ARG> 1 = 9.6k in ASCII format
<ARG> 2 = 19.2k in ASCII format
<ARG> 3 = 38.4k in ASCII format
<ARG> 4 = 57.6k in ASCII format
<ARG> 5 = 115.2k in ASCII format
Example:
<STX>07,1,<CSUM><ETX>
Response:
<STX><07><,><$><,><CSUM><ETX>
<STX><07><,><ARG><,><CSUM><ETX>
where <ARG> = error code
Error Codes TBD,
1 = out of range
6.7 SPELLMAN TEST COMMANDS

Program Hardware Version (Hardware setup)

Program Model number(Hardware setup)

Set USB Mode (Program USB)

Set USB Page Address (Program USB)

Send USB Page Data (Program USB)

Toggle Passthrough Mode (Diagnostics)

Store A/D Calibration Value (Hardware setup)

Request Miscellaneous Analog Readbacks
Contact Spellman High Voltage for details and the syntax of these
commands.