Spektrum DSM Скачать руководство пользователя

Страница: 12 / 17

Spektrum Air Module

Install the antenna adapter and antenna, then connect the antenna’s cable

to the module.

Important: Never operate the module without the antenna

connected. Doing so could overload the internal electronics and

could cause a failure.

Place the transmitter in PPM mode. This is done in the modulation menu in

your transmitter’s programming. See your Futaba MZ radio manual for specific

details if necessary.

Bind the receiver to the transmitter. See page 16 for instructions on binding. Your

system is now operational.

Channel Assignment

Note that MZ radios have a unique feature that allows the user to reassign the

functions (aileron, elevator, rudder, etc.) to any channels. This allows mixed

channels like right and left ailerons to be placed next to each other on the pulse

train to reduce the “out of sync” effects that occur when two or more channels are

operated simultaneously.

Important

: The channel default settings in standard Acro mode coincide

with the channel designation as it appears on the Spektrum receiver.

Function

Port

Throttle

Aileron

Elevator

Rudder

Gear

Aux 1

Aux 2

Aux 3

If the user changes the channel assignment, then the receiver channel will also

change and the corresponding servo for that function must be plugged into the

appropriate receiver port.
The 12 and 14MZ radios reassign the channels when switching model types to

place the mixed channels side by side to reduce the non-synchronization effects

that occur when mixed channels are separated on the pulse train. Following are the

receiver assignments for CCPM helicopters and 6-channel sailplanes.

Default Channel Assignment for CCPM Helicopters

Function

Port

Gyro

Throttle

Aileron

Throttle

Elevator

Rudder

Elevator

Gear

Pitch

Aux 1

Aux 2

Govenor

Aux 3

Default Channel Assignment for Sailplanes

Function

Port

Aux 6

Throttle

Aileron 1

Aileron

Elevator

Rudder

Aileron 2

Gear

Aux 5

Aux 1

Flap 1

Aux 3

Flap 2

Aux 2

Futaba FZ Module Special Instructions

Содержание DSM


















Результаты поиска

Содержание DSM

Отзывы:

Похожие инструкции для DSM

Бренды по названию

Популярные бренды

Spektrum DSM, Руководство пользователя

Результаты поиска

Содержание DSM

Отзывы:

Похожие инструкции для DSM

Бренды по названию

Популярные бренды