background image

80

B Warranty conditions, handling 

Conditions

Statutory guarantee conditions apply. The guarantee period for users is 
reduced to the regulations applicable to commercial customers to the 
extent that they are making use of a device suitable for commercial use, 
including in part.

Transmission of a copy of proof of purchase is a prerequisite for gua- 
rantee claims against us or one of our dealers. For verification of the 
guarantee refer to the note on handling a guarantee below.
For quick processing of guarantee claims, please inform us immedia- 
tely in writing upon noticing defects, and include a fault description and 
photos where applicable.

No guarantee is given for defects due to non-adherence to the operating 
instructions, improper treatment or normal wear and tear of the device. 
Guarantee claims are also excluded in terms of brittle components or 
expendables such as seals or similar. Finally, guarantee claims are ex-
cluded where work is performed on the device by nonauthorised parties.

Handling

Should your device display any defects within the guarantee period, plea- 
se inform us of your guarantee claim. The fastest and most convenient 
option is to return the device or the notice of defect to the dealer / agent 
responsible or directly to us:

Email: [email protected] 
Or fax to: 0049 7473 9462 99

Содержание 41000-20





















































































Отзывы: