Speidel 41000-20, Официальное инструкционное руководство

Страница: 14 / 84

14
2.3 Information on special components
Lifting device
The lifting device consists of the lifting device, the rope cable winch, the
rope and the cross with suspension hook. Check these parts for damage
or proper condition before each brewing process. For further information
and safety instructions, please refer to the enclosed manual for this cable
winch. The handle of the cable winch can be folded when not in use to save
space. The rope must also be checked for damage and monitored for signs
of brittleness or aging (see also Chapter 9 Maintenance and servicing).
When the malt pipe has been lifted out, this device can only be swiveled in
one direction and lowered there. In the swiveled state with the malt pipe, it
should be drained and unloaded as quickly as possible.
Container lid
The lid helps with heating to reach the temperatures faster. The
ventilation holes prevent pressure build-up in the boiler and allow air to
circulate easily. Water condenses on the underside of the lid at higher
temperatures. When lifting the lid, make sure that the edge of the lid is
held over the opening in the boiler so that the condensation water that
runs off (when held at an angle) runs back again.
Drain tap
The drain tap simplifies cleaning and draining of the trub after filling. The
drain is located at the lowest point and in the cleaning position (see page
74) the Braumeister can be completely drained.
3
6