SpeedTech Lights ZX-180, Инструкция по эксплуатации

Страница: 6 / 9

6 SpeedTech Lights, Inc © 2020
ZX-180
UNDER SIDE-VIEW MIRROR LIGHT
Mounting Instructions
• Place the mounting bracket against the mirror and drill mounting and cable
exit holes. The mounting bracket should be oriented such that the unit is facing
perpendicular to the vehicle and parallel to the ground.
• Secure mount with included hardware. It is best to remove the mirror from the
vehicle for actual mounting steps.
Extension Cable (Sold Separately)
• If you are extending the main cables, just add the desired length of cable to the end of the main
cables coming out of the unit. You will solder and heat shrink the wire you are lengthening from
the unit to each additional length of extension cable. DO NOT cross connect wires.
• NOTE: DO NOT leave connectors, cables, solder points exposed to heat, moisture, or debris.
• Secure mount with included hardware. It is best to remove the mirror from the
vehicle for actual mounting steps.
• Run the cables through and mount unit to the mirror. You will want to set the flash
pattern of the unit prior to this final step. Using included hardware secure the unit
to the bracket.
• Run the cables through the door then connect unit to power source and secure
mirror to vehicle again.