background image

This cycle is designed to gently move items through the water
so it fills to a higher water level. It also has a low speed final
spin.

 Handwash

Wash items with handwash on the garment tag in this cycle.
This cycle is designed to gently move items through the water
so it fills to a higher water level. It includes a gentle agitation
only, a short wash time, cold water, and a very low spin.

 Favorites

The Favorites keypad allows the user to save different cycles,
selections and options for later use. Nine favorite cycles can
be saved.

1.  Press the Favorites keypad. The control will display the cy-

cle and modifier settings for the first Favorite Cycle. The 2-
digit display will switch between 

F1

 and the cycle time for

the selected cycle. If a Special Cyle is selected, the 2-digit
display will switch between 

F1

P1

 and the cycle time.

2.  Press the keypads for the desired cycle, selection and op-

tion settings.

3.  Press the Favorites, Start/Pause or Delay Start keypad to

save the current settings.

4.  Press the Power/Cancel keypad to discard the current set-

tings.

5.  The next Favorite cycle, 

F2

, will be displayed.

After the cycles have been saved, they can be accessed using
the up and down arrow keypads after pressing the Favorites
keypad.

 Bulky

Use this cycle when washing items such as blankets, sheets,
small rugs, comforters, mattress covers and jackets. The cycle
includes a special agitation designed for these items.

 Rinse & Spin

Use to quickly rinse items. Only cold water is used in this cycle.
The rinse is followed by a spin that can be set at four different
speeds. Use the Soil Level keypad to select the spin speed.
The default spin speed is 820 RPM.

Soil Level Selection

Spin RPM

Light

400

Medium

500

Heavy

665

Max

820

Table 2

 Spin

Use this cycle to extract water from wet items. The spin speeds
can be set at four different speeds. Use the Soil Level keypad
to select the spin speed. The default spin speed is 820 RPM.

 Special Cycles

Select the Special Cycles keypad. Press the up and down ar-
row keypads for the desired cycle. The display will show 

P

 and

a number relating to the cycle. Refer to the table below.

Display

Special

Cycle

Name

Special Cycle Description

P1

Eco Heavy
Duty

This cycle uses a spray rinse to
reduce water consumption. It
also uses less hot water. It has
a longer wash time than the
Normal Eco cycle. If using fab-
ric softener in this cycle, select
the Extra Rinse option.

P2

Eco Delicate

This cycle uses a spray rinse to
reduce water consumption. It
also uses less hot water. It has
a shorter wash time and a gen-
tler wash action than the Nor-
mal Eco cycle. If using fabric
softener in this cycle, select
the Extra Rinse option.

P3

Waterproof

Wash waterproof items such as
rain coats and bed liners with
this cycle. It includes a gentle
agitation, very low spin, and
lower water levels.

For best washing results, add
another item such as a cotton
sheet on top of the waterproof
items to make sure they get
fully submersed in the water
and that no air is trapped un-
der the waterproof items.

P4

Super Soiled

Use for very heavily soiled
items. It includes a 15 minute
Soak at the beginning of the
cycle, a longer wash time than
Heavy Duty and a Extra Rinse.

Table 3 

 continues...

Control Panel

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  12

  Part No. 203967ENR3

Содержание TR7003WN


































Отзывы: