1.
SpeechWare USB MultiAdapter (USB sound card with
speech equalizer and auto gain control)
2.
Detachable snub-nosed microphone
3.
Fixed 90 degree USB adapter
4.
Short USB extension cable
5.
Windscreen (1)
6.
Carrying case
Windows Set-up
1.
Assemble the TravelMike by inserting the snub-nosed
microphone element into the microphone jack on the
MultiAdapter and the MultiAdapter into the 90 degree
USB adapter
2.
Optionally cover the microphone element with the windscreen provided to avoid unwanted
speech degradation, and to offer it an additional layer of protection from dust and saliva.
3.
Insert the entire assembly into an appropriate USB port on the notebook computer. Connect the
cable to a
DEDICATED
USB port on the computer.
DO NOT USE
any other USB cable or a
multiple USB Splitter or USB Hub device to connect to the computer. The power light (LED) of
the MultiAdapter unit will light up in
Red
. If the unit does not initialize - check that the USB
connectors are properly inserted at both ends.
4.
Wait a few seconds for
Windows
® to automatically install the corresponding USB sound drivers:
5.
After completion of the installation,
Windows®
will select the
'SpeechMatic USB
MultiAdapter'
(“USB TableMike” in the images above)
as the Recording and the Playback
Device, and will make it the default for
all microphone-in and sound-out functions.
