5
4) Audio output (speaker) settings
①
Right-click on the sound icon
on the right side of the taskbar and
select "Open Sound Settings".
②
Select "High Definition Audio Devive" for the speaker in "Choose your
Output Device" under "Output".
③
Click on "Device Properties" under "Output" and click on "Additional
Device Properties" under "Related Settings".
④
In the “
扬声器
Properties” settings panel that pops up, click on the “level”
tab, adjust the volume to an appropriate level and make sure that the sound
icon is not displaying in a mute state.
⑤
Click on the "Enhancements" tab and ensure that the option of "Disable
all sound effects" is checked.
⑥
Click on the "Advanced " tab. For "Defect Format", it is recommended
not to choose the sound quality that is similar to the microphone Hz. The
sound quality that is more than 24 bits and higher than 192000 Hz is
preferred.
