Assembly Instructions
Tools Required
052525R5 Page 1 of 2
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Evolution Corner Connector (30”D)
38906
(2) 0102049
Z-bracket
(15) 026064
1/4-20 x 5/8” PHMS
(2) 050524
#8 x 3/4” PH TEK
screw
(2) 036281
Dual unit-to-unit
bracket
1. Attach Brackets & Cord Channel
1. Place the worksurface assembly face-down onto a non-abrasive surface.
2. Attach the two Flip-top support brackets and Cord Channel with
1/4-20 x 5/8” PHM screws as shown in
Figure 1
.
Figure 1
Worksurface
assembly
(1) 052510
Worksurface assembly
(1) 044234
Cord channel
Flip-top
support
brackets
Cord channel
(5) 1/4-20 x 5/8”
PHMS
(2) 041943
1/4-20 Locknut
(2) 021554
1/4-20 x 50mm
JC bolt
4mm Hex
wrench
(included)
Phillips
screwdriver
Drill with
Phillips
driver
or
(2) 036207
Flip-top support
bracket
(1) 025039
4mm Hex wrench
