Assembly Instructions
0191158R2 Page 1 of 2
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
EM Wireless Charging Pad
99057
(1) 0142246
Security tab
Installation
1.
Partially unscrew (1) of the flat head screws under the unit.
Figure 1
.
Figure 1
Tools
Required
Phillips
screwdriver
2.
Place the security tab over the flat head screw.
Figure 2
.
Figure 2
(1) 0191147
EM Wireless Charging Pad
Flat head screw
Security tab
• If the worksurface needs to have a cutout made to receive the
charging pad, refer to the hole-cutting instructions
first
(included).
Then proceed with the installation instructions below.
• The unit requires a 7” diameter of clearance to work with Qi-
enabled phones placed in any orientation.
• The 3” dia cutout needs to be located on the worksurface at least
3.5” from any edge.
3” dia cutout
3.5”
minimum
7” dia
interference-
free zone
edge of worksurface
