Assembly Instructions
Tools
Required
0120377 Page 1 of 3
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Instructor-Side Door
55114 - 41”H
55387 - 36”H
4mm Hex
Wrench
(included)
(2) 0107139
Door Stop
(2) 0100195
3/8” Bushing
(2) 0102297
7mm x 30mm
JCWS
(1) 025039
4mm Hex
Wrench
(1) Door Assembly
1. Determine if the door will be hinged from the left or right-side of
the lectern when installed.
2. Install the (2) 3/8” bushings into the base panel holes.
Figure 1
.
3. Install the (2) door stops opposite the chosen hinge-side.
(One in upper, and one in lower position.)
1. Install Bushings and Door Stops
Note: The door comes from the
factory left-hinged. To switch the
hinge-side, see Step 4.
Figure 1
7mm x 30mm
JCWS
Door stop
7mm x 30mm
JCWS
Door stop
3/8” Bushing
3/8” Bushing
Base Panel
(1) 052311
3/8” Snap-in
grommet
