Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Руководство по эксплуатации

Страница: 43 / 217

Sampler head
Sampler head
(upside down)
Plate holder
Figure 2-5
Sampler head on
MiniCapt
Figure 2-6
Sampler head off
of the MiniCapt
Figure 2-7
Sampler head
removed
2-10
MiniCapt® Mobile Operations Manual
Chapter 2 : Unpacking and Installation Installation
2.
Remove the plate holder by rotating it counterclockwise until it comes off.
Figure 2-8
Rotate plate holder counterclockwise to remove it
3. Lay the plate holder on a flat surface (see Figure 2-9 ), bottom up.
Notice the bottom of the plate holder has socket head cap crews (see
Figure 2-10
)
that match up with the brackets on the top of the plate holder.