manualshive.com logo in svg

Spectris Particle Measuring Systems Airnet II 201-4, Руководство по эксплуатации

Поделиться
Скачать
Spectris Particle Measuring Systems Airnet II 201-4 Скачать руководство пользователя страница 3

ii 

Airnet® II 4-Channel Particle Sensors Operations Manual

Airnet II 4-Channel Particle Sensors 201-4, 301-4, 310-4, 501-4, 510-4
Operations Manual

P/N 1000016470 Rev C

© 2021 by Particle Measuring Systems, Inc.

All rights reserved.

Airnet

®

 is a registered trademark of Particle Measuring Systems, Inc.

HyperTerminal

®

 is a registered trademark of Hilgraeve, Inc.

Windows

®

 is a registered trademark of Microsoft Corporation.

Molex

®

 and Mini-Fit

®

 are registered trademarks of Molex.

All trademarks appearing in this manual are the property of their respective owners. 

This confidential document contains proprietary information, which is protected by 
copyright. All rights are reserved. No part of this document may be reproduced, 
distributed, or transmitted in any form without the prior written consent of Particle 
Measuring Systems. The information contained in this document is subject to change 
without notice.

Quality Statement

The Quality Policy of Particle Measuring Systems is to strive to meet or exceed the 
needs and expectations of our customers and to align the activities of all employees 
with the common focus of customer satisfaction through continuous improvement in 
the quality of our products and services.

Environmental Information

There are no potential means by which asbestos exposure is possible because there 
are no materials in the design or manufacture of the Airnet II 4-Channel Particle 
Sensors containing asbestos.

This equipment must be properly disposed of at end-of-life by means of an authorized 
waste management system. Contact our Customer Response Center at (877) 475-3317 
or +1 (303) 443-7100 (International) for dismantling and disposal information.

Patent Information

U.S. and foreign patents for this equipment are pending.

DO NOT REPRODUCE OR DISTRIBUTE

CONFIDENTIAL DOCUMENT

Содержание Particle Measuring Systems Airnet II 201-4




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды