SERVO
PRO NANOCHROME Gas Analyser
15
04416001A / Revision 7
1.6 Standalone PC Rear Connections
Figure 4 : Standalone PC rear connections
1.
Power inlet with switch and fuse
2.
RS-232 port for remote terminal
(marked “AUX”
)
3.
RS-232 port for secondary
unit (marked “TO ANALYSER”
)
4.
USB port
5.
Ethernet port
CAUTION
To comply with the requirements of the EU EMC Directive, data cables used with the
standalone PC (USB, Ethernet) must be fitted with ferrite beads (Würth 74271131 or
74271221, depending on cable size), which should be clamped around 2 turns of cable.
CAUTION
To comply with the requirements of the EU EMC Directive, the front USB port should be
use with a USB memory stick only. Rear USB port to be used with Keyboard mouse or
USB memory stick only. Only a keyboard supplied by Servomex shall be used.
CAUTION
To
comply with the requirements of the EU EMC Directive, a single turn ferrite (Wurth
type 742-711-31) shall be fitted to the RS232 output cable.
