Spectrex SharpEye 40/40M, Руководство пользователя

Страница: 76 / 90

Multi IR Hydrocarbon and Hydrogen Flame Detector User Guide
76 Flame Simulator FS-1400
D.1.1 Ordering Information
The P/N of the Flame Simulator Kit is 380114-4.
The kit is supplied in a carry case that includes:
 Flame Simulator FS-1400
 Charger
 Tool Kit
 Technical Manual TM380302
D.1.2 Unpacking
Verify that you have received the following contents:
 Delivery form
 Flame simulator with integral battery
 Battery charger
 Tool keys
 User manual
 FAT forms
 EU declaration
 Storage case
D.1.3 Operating Instructions
Warning : Do not open the flame simulator to charge the batteries or for
any other reason in a hazardous area.
Caution : The following test simulates a real fire condition and may activate
the extinguishing system or other alarms. If activation is not desired,
disconnect/inhibit them before the test and reconnect after the simulation.
➣ To simulate a fire:
1
Verify you are at the correct distance from the detector according to the
type of detector and the detector sensitivity.
2
Using the mechanical sight, aim the flame simulator toward the center of
the detector.
3
Push the activate button, and then use the laser spot for fine adjustment
toward the center of the detector.
4
Keep the simulator aimed at the detector for up to 50 seconds, until you
trigger an alarm.
5
Wait 20 seconds before repeating the test.