14226915-IG, Edition 1.0
April 2018, Original document
64
Changing Silent Mode Settings
When silent mode is turned on, you can select other ways of indicating incoming calls or messages:
l
Display flashing
: When turned on, the display flashes when an incoming call arrives.
l
Vibrate
: When turned on, the handset vibrates when an incoming call arrives.
l
Short ring
: When turned on, a short ring sounds when an incoming call arrives.
To Change Silent Mode Settings:
1. Press
Menu
to enter main menu.
2. Scroll to
Settings
, and press
Select
.
3. Scroll to
Silent mode
, and press
Select
.
4. Scroll to
Settings
, and press
Change
.
5. Scroll to the desired setting, and press
Select
.
Auto Key Lock
Use auto key lock to prevent keys from being accidentally pressed.
With auto key lock turned on, the handset will automatically lock keypad after 30 seconds.
To Turn Auto Key Lock On/Off
1. Press
Menu
to enter main menu.
2. Scroll to
Settings
, and press
Select
.
3. Scroll to
Auto key lock
, and press
Select
.
4. Press
Change
to select between
On
or
Off
.
5. To answer a call when Auto key lock is on, press
. When you end the call, keypad auto-
matically locks.
Note:
Alternatively, you can also turn auto key lock on/off by pressing
Menu
followed by
*
, while
on hook.
Backlight
To save power the backlight can be set to automatically either dim or turn off. This will happen after
the handset has been idle for a configurable time delay.
The display backlight automatically turns on again when e.g. an incoming call or message arrives, or
if a key is pressed.
The backlight turns off when handset is idle after a preset period of time delay.
The time delay can be adjusted between eight levels. The highest level will result in infinite time
delay, and the backlight will never dim or turn off. The other levels will dim with different time delays.
Spectralink Spectralink 7502 Handset User Guide
