SpectraLink NetLink 8000 Скачать руководство пользователя страница 1

NETLINK 8000 SERIES WIRELESS 

TELEPHONE 

AND ACCESSORIES USER GUIDE

SpectraLink Corporation

5755 Central Avenue

Boulder, CO 80301

303 440 5330

800 676 5465

www.spectralink.com

Trademark Information

SpectraLink 

NetLink 

Are trademarks and registered trademarks of  SpectraLink Corporation. 

The SpectraLink logo is a registered trademark in the United States of America  

and in other countries. 

Copyright © 2007 SpectraLink Corporation.  

All rights reserved
Information in this document is subject to change without notice and does not 

represent a commitment on the part of  SpectraLink Corporation. The software 

described in this document is furnished under a license and/or copyright and may 

only be used with the terms of  SpectraLink’s software license agreement as found in 

this manual or at  

http://www.spectralink.com/consumer/resources/software_updates.jsp. 
The software may be used only in accordance with the terms of  the agreement. No 

part of  this manual, or the software described herein, may be reproduced or transmit-

ted in any form or by any means, electronic or mechanical, including photocopying 

and recording, for any purpose except for the sole intent to operate the product or 

without the express written permission of  SpectraLink Corporation.

P/N 72-1302-00-A

Содержание NetLink 8000

















































Отзывы: