SpectraLink Corporation
Installation
NetLink OAI Gateway
5. Configuration
Procedures
The OAI Gateway must be configured according to the type of system in use: NetLink
Telephony Gateway system or IP system. If the NetLink OAI Gateway is being used in
an IP phone system, the configuration proceeds independently of the IP system. If the
system is using one or more NetLink Telephony Gateways, the OAI Gateway will
communicate with them during configuration and operation. These configuration
procedures should be done after the Wireless Telephones have been configured in the
NetLink Telephony Gateway.
Generally, configuration follows these steps:
1. Establish type of system through
OAI Box Configuration
option,
2. Establish Network settings through
Network Configuration
option,
3. Configure the Wireless Telephones through either
OAI Line Configuration
for
NetLink Gateway systems or through
Telephone Line Configuration
option for
IP systems.
4. (IP systems) Use the
Feature Programming
option to configure the function
sequence that activates the OAI feature. (In NetLink Telephony Gateway systems,
the OAI function sequence is programmed in the Telephony Gateway).
Part Number: 72-0078-
0
7-A.doc
Page 19