Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016
115
Understanding Macro Definitions
The
efk.efklist.x.action.string
can be defined by one of the following:
Macro Action
Prompt Macro Substitution
Expanded Macros
Macro Action
The action string is executed in the order it displays, i.e. as it is read from left to right. If
necessary, user input is collected before any action is taken. The action string can contain the
following fields.
To aid in the understanding of each of the following fields we will reference an example macro
action string:
$LCallPark$20371$P1N4$$Trefer$$Cwaitconnect$
Note that this example does not contain all actions.
Macro Actions and Descriptions
$L<label>$
This is the label that describes the macro action to be performed and will be displayed on the line key or softkey
on the handset. The value can be any string including the null string (in this case, no label displays). This label
will be used if no other label has been defined (up to the point where this field is parsed in the macro). Make
this the first entry in the action string to be sure this label is used; otherwise another label may be used and this
one ignored.
In the above example, the label portion is the
$LCallPark$
. This field is not required but can be helpful to
include when later referencing or troubleshooting macro setup.
