SpectraLink 8400 Series Скачать руководство пользователя страница 60

Страница: 60 / 134

Polycom® SpectraLink® 8400 Series Wireless Telephone Deployment Guide

Calling

Display

Upgrading

Symptom

Problem

Corrective Action

The line icon shows an
unregistered line icon.

The line is unregistered.

•

Verify that the appropriate
configuration parameters are set
correctly.

•

Verify that the call server is functioning
correctly.

Symptom

Problem

Corrective Action

The time and date are not
displayed.

You have disconnected the
handset from the WLAN or there
is no SNTP server configured.

Do one of the following:

•

Reconnect the handset to the WLAN.

•

Disable the time and date display on
the handset:

Select

Settings > Basic Settings >

Preferences > Time & Date

The Time & Date screen displays.

Scroll to Disable, and then press the

key.

Press the

Home

key.

The Home Screen no longer displays
the time and date.

Symptom

Problem

Corrective Action

The handset does not upgrade
from the provisioning server.

The provisioning server is offline
or the handset is disconnected
from the WLAN.

•

Verify that the provisioning server
address is correct on the handset and
in the configuration files.

•

Verify that the Polycom UC Software
is available on the provisioning server.

•

Verify that the configuration files are
available from the provisioning server.

•

Verify that WLAN parameters in the
configuration files are correct.

Содержание 8400 Series







































































































































Результаты поиска

Содержание 8400 Series

Отзывы:

SpectraLink 8400 Series, Руководство по развертыванию, Страница: 60 / 134

Результаты поиска

Содержание 8400 Series

Отзывы: