SpectraLink 8400 Series, Руководство по развертыванию, Страница: 37 / 134

Deploying SpectraLink 8400 Series Handsets
27
g
If you selected EAP-FAST for the EAP type and want to perform
in-band provisioning—the PAC file can be automatically loaded from
the network:
» Enable in-band provisioning
(
device.wifi.wpa2Ent.eapFast.inBandProv=”1”
).
» Remove any existing PAC file by selecting Settings > Advanced
Settings > > Network Configuration > Network Interfaces >
WiFi Menu > WPA2-Enterprise > PAC File Menu > Remove
PAC File > Remove on the handset, and pressing the OK soft key.
When prompted, enter the administrative password. The default
value is 456 .
12
Set the Service Set Identifier (SSID) of the wireless network
(
device.wifi.ssid=”SSID1”
).
13
Determine whether or not the handset will connect only to APs that
enforce admission control (Wi-Fi Multimedia Admission Control
(WMM-AC)) and set the parameters accordingly
(device.wifi.acMandatory).
Use the default (the value
0 ) to set the Admission control to optional or to
1 if it is required.
14
Set the regulatory domain to the appropriate value for your location
(
device.wifi.radio.regulatoryDomain=”1”
).
For a list of supported regulatory domains, see Regulatory Domain and
Radio Settings on page 16 .
When using an XML editor, leave out the quotation marks at the beginning and end
of the certificate.