Spectracom VelaSync 1225, Руководство пользователя

Страница: 177 / 272

Proceed as follows:
Removing the bezel
Remove the front bezel from the chassis, by unlocking it with the key, then press-
ing the red release knob, then removing the bezel with both hands. While the
bezel is removed, check if the filter requires cleaning or replacement.
Figure 4-2:
Removing the front bezel
Removing the HDD carrier
1.
The HDDs are installed in carriers. To release a carrier, press down its red release
button next to the drive LEDs. The handle will be released.
2. Swing the handle out all the way.
3. Pull out the carrier from the chassis, using the handle.
Figure 4-3:
Removing a HDD carrier
4.3 Hardware Tasks
CHAPTER
4
•
VelaSync User's Manual Rev. 3 165