PathAlign-R
Spectracom Corporation
2200 / 2240 / 2241 PathAlign-R Manual
4-38
Time Line 4:
hh:mm:ss
(’
hh
’ is the hour ’
mm
’ is the minutes, ’
ss
’ is the seconds)
Latitude Line 5: (’
N
’ or ’
S
’ followed by ’
dd
’ degrees and ’
mm.mmm
’ minutes)
Longitude Line 6: (’
E
’ or ’
W
’ followed by ’
ddd
’ degrees and ’
mm.mmm
’ minutes)
Frequency Line 7:
fffff
(the frequency, in MHz, of the measurement)
Level Line 8:
lll.l
(the RSL, in dB, resolved to 1/10 dB)
4.6.4.5 Deleting Selected Records
The Log View-R utility allows you to delete selected records from the composite record being
displayed. This operation does not delete records from the hard drive but only from the display.
Once deleted, these records no longer appear in the display and a new composite record,
without the deleted individual records, can now be saved (see “
Saving All Data Records
”). To
delete a record(s), check the appropriate ’Delete’ box next to the individual data record(s) you
want to delete. The [Delete Records] soft-button will now become active (not grayed out).
Selecting this soft-button will initiate the delete function and the individual data record(s)
selected will be deleted from the display. Records below the deleted records will move up on the
display so all displayed rows will be contiguous.
4.6.4.6 Printing Displayed Records
The records currently being displayed in Log View-R can be printed at any time by pressing the
[Print Screen] soft-button in the upper right of the screen.
4.6.4.7 Clearing the Memory
In order to clear the memory in the Analyze-R of all data, you must first download/save all data
records currently in the instrument’s memory (see “
Download/Save Data Records
”). After
downloading/saving all data records the [Clear Data in Instrument] soft-button will be enabled.
Selecting this soft-button will initiate the clear operation and you simply follow the prompts.
4.6.4.8 Copying, Deleting, Renaming, or Moving Data Files on the Hard Drive
The Log View-R software utility cannot copy, delete, rename or move data files on the hard
drive of your computer. This prevents accidental erasure, alteration or relocation of original data,
which could not be recovered once the instrument’s memory has been cleared. If it is desired to
copy, move, rename or delete data files on the hard drive, these file operations should be
performed using Windows Explorer.
4.6.4.9 Working with Data Files in Other Applications
To view data records saved to disk, using Windows Excel, Word, Notepad or similar
applications, go to:
C:/Program Files/LogView/
and highlight the file, hold down the
[SHIFT] key and right click the mouse, then select "Open with...", select "NOTEPAD", "Excel",
"Word" or other appropriate application; [OK]. This will display the data file in the Windows
