PathAlign-R
Spectracom Corporation
2200 / 2240 / 2241 PathAlign-R Manual
3-20
3
Operation
3.1
Introduction
This section describes the operation of the PathAlign-R, Microwave Antenna Path Alignment
Test Set. This description includes the front panel and the rear panel controls, indicators, and
connectors, general instrument operating procedures or each mode and function, and
instrument operation.
Note:
This instrument is not waterproof. To minimize weather related
problems, keep instrument within its carrying bag.
Figure 3-1. Model 2240 Front Panel
Front Panel Controls, Indicators, Display, and Connectors
Figure 3-1 depicts a typical 2240 Front Panel.
3.2
Front Panel
3.2.1 Mode Selections
The following modes of operation are selectable by setting the appropriate switch [XXX] or
switches. Appropriate LED indicators light (where provided) to indicate selection or operation of
a function.
Name Function
POWER On/Off: Toggling the [POWER] switch turns power to the 2240 ON and
OFF. When power to the 2240 is ON, the unit’s LCD display
lights and transmit power is automatically output through one of
the SMA front panel connectors (provided the Thumbwheel
