Spectracom GSG-5 series, Руководство пользователя с руководством по SCPI

Страница: 174 / 378

Figure 4-9:
Data recorder View window
Preparing the Recording of Data Generated by a GSG Unit
On the left side of the screen:
1.
Check the box
GSG unit
, then click to configure the connection (for details, see "Con
necting StudioView to GSG" on page 116.)
2.
Choose which data to record: Navigation data, Observations, RSG data, Satellites data
(e.g., satellite position, Doppler shift, etc), navigation messages.
Select
Output files
for each recorded data category.
3.
As an option, the NMEA data can also be
redirected
to a serial port e.g., to use it with
a device that utilizes real-time NMEA data (such as a marine plotter). If so desired, select
and configure the port to be used to redirect the data.
Preparing the Recording of Data Generated by a GNSS Receiver
On the right side of the screen:
1.
Select Receiver if you have a GNSS receiver connected to your StudioView computer,
and you want to record the life sky data it reads while e.g., driving a car
2.
Select and configure the Serial port (if in doubt, use the default settings)
3.
Select the type of Receiver chip : If you have a SiRF chip, StudioView will configure this
receiver automatically.
4.
Select an
Output file
for the recorded NMEA data that the receiver sees.
158
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
4.9 Studioview Tasks