Spectracom GSG-5 series, Руководство пользователя с руководством по SCPI

Страница: 157 / 378

Scenario data is stored in a text file. To show/hide text of scenario file, click .To configure
the scenario, fill in the appropriate fields under the tabs described below.
Once you have completed your scenario configuration, save it and upload the scenario file to
the GSG unit by clicking .
Note: StudioView stores all files in a directory chosen during the installation pro
cess. By default, the repository is located at C:\User
s\UserName\Documents\Spectracom\GSG StudioView\Repository . You may save
your scenario in any other folder, but please note you must also save any tra
jectory, event, antenna pattern, or navigation files you may want to include to
your scenario in the same folder.
The Scenario Editor provides access to all essential scenario parameters. To access the Scen
ario Editor, click , or navigate to Tools > Scenario Editor :
Figure 4-7:
Scenario Editor
General tab
Under the General tab, you can edit basic parameters like Start time, Duration and Start pos
ition:
The Start time is specified using GPS Time. The GPS Time is always used when dis
playing time. This is not equal to the UTC time frequently displayed by the receivers.
Contrary to the GPS time, UTC contains leap seconds.
The Start Time can be a set time, or the current time derived from an NTP server spe
cified in the Network Configuration settings of GSG device. To use this feature, check
Synchronize from the NTP server checkbox.
4.9 Studioview Tasks
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
141