Spectracom GSG-5 series, Руководство пользователя с руководством по SCPI

Страница: 120 / 378

same line, press enter , or the RIGHT arrow key. To move to the previous field on the same line,
press the LEFT arrow key.
To proceed to the next View , press view .
To finish editing , press start , exit , or cancel . (With start and exit , you will be given the choice to
save the scenario under a different name.)
Second Configuration View
The second Scenario Configuration View allows you to configure the Trajectory , Ephemeris
data, Event data and Leap Second simulation ( LS ).
Also accessible from this View are:
The Antenna submenu, which allows the configuration of the Antenna model , Lever arm ,
and Elevation mask .
The Advanced submenu, which provides access to Multipath and Interference signals .
Also, the Base station (RTK option) can be turned on, and output messages defined.
Environment models can be changed to ‘set’ which allows the selection of Environment
and Vehicle models (created with the third-party tool
SketchUp
(a Spectracom Technical
Note about Vehicle Modeling using Sketchup is available upon request).
The
Atmospheric
model submenu.
Note: Some of the functionality shown is optional. For more information on GSG
Options, see "GSG Series Model Variants and Options" on page 194 .
Figure 4-2:
Scenario Configuration View 2/3
Third Configuration View
The third Scenario Configuration View allows you to configure the satellites to be simulated.
104
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
4.1 Working with Scenarios