3528 Bagley Ave. N. Seattle, WA 98103 | 2329 N. Career Ave, Suite 205 Sioux Falls, SD 57107
Corporate: +1 206 420 7514 | Sales: +1 605 274 6055 | Toll Free: 877 886 5112 | www.spectracal.com
CalMAN DPG-1400
Digital Pattern Generator
Quick-Start Guide
1.
Identifying the parts
The small box with a USB cable is your CalMAN IR
Controller. It is an InfraRed transceiver that plugs into
your computer. CalMAN uses the IR Controller to
communicate with the DPG-1400 remotely. The
larger black box is the DPG-1400 itself. The USB
drive and the power supply attach to the DPG-1400, as
explained below. The remote control is used for setup.
2.
Make sure that you have the most current CalMAN Device Driver Kit
If you have not downloaded and installed version 1.3 of the CalMAN Device Driver Kit
(required for IR Controller support), download it now from
www.spectracal.com
. (From
the Downloads menu, choose “Other Downloads” and select the Device Driver Kit from
the list. Run the MSI to install the Device Driver Kit on your system.
3.
Install the CalMAN IR Controller Driver
Plug the IR Controller into a USB port on your system. Windows will pop up a Found
New Hardware Wizard. To the prompt "What do you want the Wizard to do," select the
option, "Install from a list or specific location."
Use the
Browse
button to locate the directory where you installed the Device Driver Kit.
The default driver files are listed below.
C:\Program Files\SpectraCal\Drivers\USB-UIRT
Or with a 64bit Windows PC the locations will be
C:\Program Files (x86)\SpectraCal\Drivers\USB-UIRT
Windows7 does not prompt for driver installation when a device is first attached. In
order to install the drivers, go to
Start/Control Panel
, choose
System
and then choose
Device Manager
on the left hand side of the
System Properties
window. Find your
device in the list. Your device should be listed with a yellow exclamation point on its
icon. Right click on the device and choose
Update Driver Software
. Choose
Search my
computer for driver software
and then continue following the directions for installing the
driver as listed above.
4.
Place the USB drive into the USB port on the DPG-1400
5.
Connect the power
Plug the DPG-1400 into its power supply and plug in the power supply.
